FiberOptics24.com 0
Duct Install Microduct: Microduct Assembly 10/8 mm with Tracer TPD 10/8 mm 1-7 -way Tr, TIA598 ft
FiberOptics24.com
$0.00

Description

TPD 10/8 mm 1-7 -way Tr, TIA598 ft

  • For direct burial
  • 1, 2, 4 or 7 over-sheathed ducts
  • 10/8 mm microducts
  • Low friction inner surface for maximum installation lengths
  • Longitudinal grooves for maximum installation lengths
  • Integrated tracer wire under sheath

            Application

            The tight protected duct assemblies consist of a number of microducts with an inner low friction surface that enables installation of micro cables or nano cables. The duct assemblies are bundled with a single or dual HDPE sheath depending on configuration. The design makes the ducts suitable for installation directly into the ground. The round structure enables easy splicing and sealing at joints and branch locations.

            The integrated tracer wire saves time and installation cost since an additional wire for tracing is not required.

            Design

            The duct assemblies are available in several versions with 1 to 7 microducts.

            10/8 mm microducts are optimized for installation of micro cables and nano cables. The microducts have a low-friction inner surface with longitudinal grooves for best blowing performance.

            Product Information

            Microducts and outer sheath: HDPE

            Tracer Wire

            Single ducts: 24 AWG (0.2 mm²)
            Microduct assemblies: 18 AWG (0.8 mm²)
            Material: Isolated, stranded copper

            Technical Information

            Color Code TIA598
            Temperature, Operation [°C] -40 to +60
            Temperature, Storage [°C] -40 to +60
            Temperature, Installation [°C] -20 to +50
            Conformance

            Abrasion: IEC 60794-1-2-E2B(1)
            Kink: IEC 60794-1-2-E10, 20 x outer diameter
            Impact: IEC 60794-1-2-E4
            Crush: IEC 60794-1-2-E3
            Tensile: IEC 60794-1-2-E
            Bend: IEC 60794-1-2-E11A
            Torsion: IEC 60794-1-2-E
            Flexibility: IEC 60794-1-2-E8
            Inner Clearance: IEC 60794-5-20, IEC 60794-5-10, Ann. D
            Marking Duct assemblies have markings showing the tube length. The individual microducts are numbered and also identified by their color and position in the bundle according to the TIA598 standard.