FiberOptics24.com 0
Duct Install Microduct: Microduct Assembly 12/10 mm with Tracer TPD 12/10 mm 1-7 -way Tr, TIA598
FiberOptics24.com
$0.00

Description

TPD 12/10 mm 1-7 -way Tr, TIA598

  • For installation in existing ducts
  • 1, 2, 4 or 7 over-sheathed ducts
  • 12/10 mm microducts
  • Low friction inner surface for maximum installation lengths
  • Longitudinal grooves for maximum installation lengths
  • Integrated tracer wire under sheath

                  Application

                  The tight protected duct assemblies consist of a number of microducts with an inner low friction surface that enables installation of micro cables or nano cables. The duct assemblies are bundled with a single HDPE sheath. The design makes the duct assemblies especially suitable for installation into narrow existing ducts (pipes) or pipes occupied with cables or other obstacles. The round structure enables easy splicing and sealing at joints and branch locations. The microducts are optimized for best performance in combination with the Hexatronic Viper Micro Cable and Hexatronic Raptor Nano Cables.

                  The integrated tracer wire saves time and installation cost since an additional wire for tracing is not required.

                  Design

                  The duct assemblies are available in several versions with 1 to 7 microducts.

                  12/10 mm microducts are optimized for installation of micro cables and nano cables. The microducts have a low-friction inner surface with longitudinal grooves for best blowing performance.

                  Product Information

                  Microducts and outer sheath: HDPE

                  Tracer Wire

                  Single ducts: 24 AWG (0.2 mm²)
                  Microduct assemblies: 18 AWG (0.8 mm²)
                  Material: Isolated, stranded copper

                  Technical Information

                  Color Code TIA598
                  Temperature, Operation [°C] -40 to +60
                  Temperature, Storage [°C] -40 to +60
                  Temperature, Installation [°C] -20 to +50
                  Conformance

                  Abrasion: IEC 60794-1-2-E2B(1)
                  Kink: IEC 60794-1-2-E10, 20 x outer diameter
                  Impact: IEC 60794-1-2-E4
                  Crush: IEC 60794-1-2-E3
                  Tensile: IEC 60794-1-2-E
                  Bend: IEC 60794-1-2-E11A
                  Torsion: IEC 60794-1-2-E
                  Flexibility: IEC 60794-1-2-E8
                  Inner Clearance: IEC 60794-5-20, IEC 60794-5-10, Ann. D
                  Marking Duct assemblies have markings showing the tube length. The individual microducts are numbered and also identified by their color and position in the bundle according to the TIA598 Standard.