Duct Install Microduct: Microduct Assembly 12/10 mm with Tracer TPD 12/10 mm 1-7 -way Tr, TIA598
TPD 12/10 mm 1-7 -way Tr, TIA598
- For installation in existing ducts
- 1, 2, 4 or 7 over-sheathed ducts
- 12/10 mm microducts
- Low friction inner surface for maximum installation lengths
- Longitudinal grooves for maximum installation lengths
- Integrated tracer wire under sheath
Application
The tight protected duct assemblies consist of a number of microducts with an inner low friction surface that enables installation of micro cables or nano cables. The duct assemblies are bundled with a single HDPE sheath. The design makes the duct assemblies especially suitable for installation into narrow existing ducts (pipes) or pipes occupied with cables or other obstacles. The round structure enables easy splicing and sealing at joints and branch locations. The microducts are optimized for best performance in combination with the Hexatronic Viper Micro Cable and Hexatronic Raptor Nano Cables.
The integrated tracer wire saves time and installation cost since an additional wire for tracing is not required.
Design
The duct assemblies are available in several versions with 1 to 7 microducts.
12/10 mm microducts are optimized for installation of micro cables and nano cables. The microducts have a low-friction inner surface with longitudinal grooves for best blowing performance.
Product Information
Microducts and outer sheath: HDPE
Tracer Wire
Single ducts: 24 AWG (0.2 mm²)
Microduct assemblies: 18 AWG (0.8 mm²)
Material: Isolated, stranded copper
Technical Information
| Color Code | TIA598 |
|---|---|
| Temperature, Operation [°C] | -40 to +60 |
| Temperature, Storage [°C] | -40 to +60 |
| Temperature, Installation [°C] | -20 to +50 |
| Conformance | Abrasion: IEC 60794-1-2-E2B(1) |
| Marking | Duct assemblies have markings showing the tube length. The individual microducts are numbered and also identified by their color and position in the bundle according to the TIA598 Standard. |
