Handheld fiber microscope
- Detecting fiber connection
- Centering the image
- Image magnification
- Adjust the focus
- Analyze data to judge whether passed of failed
- Testing report
The Fiber Microscope is chiefly used in checking if the fiber end-face is clean. With the ability to display a clear image and the double amplification function, the V20 is able to analyze the cleanliness of the fiber end-face.
--
Convenient test capability with PC software Such software is installed on a PC, connected easily by a USB 2.0 interface. This makes the operation convenient. The results can be analyzed through the following procedure: connecting the optical fiber to the device, adjusting the sharpness and then tapping “screenshot”.
Specifications
| Resolution | 3.2μm |
|---|---|
| Image sensor | 640 x 480 (VGA) |
| Visual test | < 5μm |
| View angle | 200μm*200μm of high magnification / 360μm*360μm of low magnification |
| Light source | Blue LED |
| luminance technique | Coaxial light source |
| Digital zoom | 3 grades |
| Connector | USB 2.0 |
| Operating / Storage temperature | -10°C to 50°C / -40°C to 70°C |
| Patchcord Tip Adapters | 2.5mm (UPC, APC), 1.25mm (UPC, APC) |