EasySplicer MK2 - Fusion Splicer

$1,500.00
$1,500.00
$2,300.00
Sold out
Quantity must be 1 or more
EasySplicer is a Fusion Splicer made in Sweden, designed for working daily with fiber optic installations.
It´s small and handy to bring along. The construction is made very rugged and even if splicing should take place under good conditions (indoors) it is can be used out in the field. Extremly easy to learn and handle. Perfect for the installer (electrical, antenna, LAN) who wants to start working with fiber (with little/none experience of fiber). Splices really well, compatible with much more expensive machines. And the complete package to a fabulous price of course.


Fusion splicing made easy and affordable with the EasySplicer mk2.

  • For both Singlemode and Multimode fibers.
  • Splicing time of less then 7 seconds.
  • Loss estimation.
  • Pull test of performed splices.
  • Built in oven.
  • Easy to use and to carry along.
  • SOC holder and connectors available (optional).


The Easysplcer MK-2 kit comes with:

3 pair of fiberholders, heater, battery, carrying-case, cleaver, stripper, power cord and manual.

Specifications


Splicing method

V-groove (cladding alignment).

Fiber Types

SMF, MMF 50/125μm and 62.5/125μm fiber,

250μm primary and 900μm secondary coated fiber.

Fiber Handling

Fiber holders, 3 pairs (250, 900 and loose tube).

Splice Programs

3 pre-defined. SMF, MMF, OM1.

Typical Splice Loss

0.03dB SMF, 0.01dB MMF.

Altitude Compensation

Automatic up to 4100 meters altitude with compensation for moisture and temperature.

Typical Cycle

Time 7s + 35s (splice + oven cycle).

Sleeve Dimensions

Max 64mm length, 2-5mm diameter supported by oven.

Communication

USB, mini usb plug.

Memory Internal

1MB, External SD-Card.

Display

LCD, color, 2.8 , 320x240 pixels.

Oven Ceramic/teflon-type.

40mm sleeves in about 35 sec.

Magnification Camera

140x.

Operating Environment

0-40°C, max 95% RH, non-condensing.

Size

230x98x53mm.

Weight

800g.

Power Sources

External power supply, 6V, 1.5A, 100-240VAC 50-60Hz, Built in 3400mAh Li-Ion battery pack.

Splicing Capacity

60 splice + oven cycles.

Additional Features

Loss estimation, Fiber fault detection, SD-card for logging etc.
Go to full site