- For blowing in fibre optic cables, specifically suitable for indoor use
- Material: PE-HD according to DIN 16874 translucent base material to identify the occupancy, white colour for unobtrusive use indoor
- Low-Smoke according to EN 61034-2, flame-retardant according to EN 61386-1 and halogen-free to DIN V VDE V 0604-2-100 (LSOH) for maximum safety in the event of a fire
- RTR internal grooving for optimal blow-in-results
- Classification according to EN 61386-22 (VDE0605) for defining the installation
- Creep test according to DIN 16874 (80 °C / 4.0 MPa / 170 h)
- Ultraviolet resistance for min. two years in Central Europe
Application
Application possibilities according to DIN VDE 0100-520:2013-06 / IEC 60364-5-52:2009-10:
thin-walled inhouse microducts:
- Unprotected installation on plaster
- Installed in cavity wall / wood (combustible materials), in plaster, in structural cavities, in suspended ceilings
- Ceiling mounting (mounting distance < 0.80 m)
Thick-walled inhouse microducts:
- Unprotected outdoor mounting
- Unprotected mounting on plaster
- Underfloor mounting (screed)
- Installed in concrete, in cavity wall / wood (combustible materials), in plaster, in structural cavities, in suspended ceilings
- Ceiling mounting (mounting distance < 0.80 m)
Design
The inhouse-microducts are available in the following dimensions:
- 7/5,5 mm
- 7/4 mm
- 10/6 mm
- 10/8 mm
- 12/9.8 mm
- 12/8 mm
- 14/10 mm
Product Information
Microducts and outer sheath: HDPE
Tracer Wire
Single ducts: 24 AWG (0.2 mm²)
Microduct assemblies: 18 AWG (0.8 mm²)
Material: Isolated, stranded copper
Technical Information
| Product Color | The colour of the microducts is white, translucent for unobtrusive use indoors. |
|---|---|
| Temperature, Operation [°C] | -15 to +90 |
| Temperature, Storage [°C] | -15 to +90 |
| Temperature, Installation [°C] | -15 to +90 |
| Conformance | -Material: PE-HD according to DIN 16874, Creep rupture test 170 h / 80 °C / 4.0 MPa Classification code according to DIN EN 61386-22: thin-walled Inhouse-microducts (7/5,5 mm; 10/8 mm; 12/9,8 mm): 2-4-3-2-2-0-0-0-4-1-1-0 thick-walled Inhouse-microducts (7/4 mm; 10/6 mm; 12/8 mm; 14/10 mm): 3-4-3-3-2-0-0-0-4-2-1-0 Abrasion: IEC 60794-1-2-E2B(1) |
| Marking | The identification of microducts made from PE-HD is carried out using permanent, abrasion-resistant inkjet printing with a 1 m spacing with the following information:
-Production date (day, month, year): e.g. 10/01/2020 -Shift -Machine -Meterage: e.g. 001 m |
| Ordering Information | Delivery lengths according to the product specification or according to customer requirements Drum specifications (Diameter [mm] x Width [mm] x Core [mm] / Empty weight [kg]):
|