Professional Cabling Tester and Network Diagnostic Tool
CableMaster 800 is a professional cable tester equipped with an RJ45 jack for network cables and an F-type connector for coaxial cables. The CableMaster 800 verifi es the wire map, determines the cable length and distance to the fault. The results can be saved and documented using the PC-based reporti ng soft ware. In additi on, the CableMaster 800 off ers a multi tude of network diagnosti cs features for trouble-shooti ng such as cable tracing, link detecti on up to 1Gb/s, Ping, network discovery, PoE tests and much more.
The CableMaster 800 is perfectly suited for professional installers and network operators who are challenged with testing and troubleshooting network (RJ45) and coaxial cabling in active networks.
- Tests network and coaxial cables (RJ45 jack and F-type connector)
- Displays wire map in graphical format for rapid troubleshooting
- Determines cable length and distance to the cable fault performing a full TDR measurement
- Cable/port identification using the cable/port ID remotes
- PoE detection and load test
- Link test up to 1 Gb/s to identify link capability and current link status
- Pinging of individual or lists of IPv4 and IPv6 addresses as well as any URL on internet
- Network Discovery creates lists of broadcasted devices
- CDP/LLDP/NDP and VLAN discovery
- High resolution color display for excellent readability in any environment
- Generation of test reports and documentation with PC-based reporting software
Network Testing CableMaster 800 enables rapid identification of network ports/outlets while displaying link capability and current link status. With the added network discovery features, any broadcasted devices in the network can be discovered and displayed and saved as a list. Pinging individual or lists of IPv4 and IPv6 addresses as well as a URL will detect their availability
Facts
- Tests the network and coaxial cabling (RJ45 and F-coaxial connection)
- Determination of the wiring plan with graphical display for quick troubleshooting
- Determination of the cable length and distance to points of failure by means of full-fledged TDR measurement
- High-contrast color display guarantees excellent readability in any environment
- Test report and documentation creation with PC evaluation software
- Cable tracking / port allocation with audible tracer
- PoE detection and load test
- Link test up to 1 Gbit/s
- Pings individual or lists of IPv4 and IPv6 addresses as well as any URL's on the Internet at
- Network Discovery created lists of available network subscribers
- CDP/LLDP/NDP and VLAN detection
- Socket/Port detection with cable/port ID remote units
- Voltage warning
- Link flashing
- Measurement memory
- Connections (Test): RJ45/Coax (Type F)
- Connections (Data Exchange): micro USB
Specifications
| Measurement Technology | Time Domain Reflectometry (TDR) and capacity |
| Cable Measurements | Cable Testing and ID: up to 1,000 ft (305 m) Split Pair Detection: 3 ft (1 m) to 1,000 ft (305 m) Length Measurement: 0 to 1,500 ft (457 m), ± (5%+1ft) Supports 8 continuity and ID numbers remotes (RJ 45) Supports 20 RJ 45 and 20 F connector ID only remotes |
| Power over Ethernet | Tests for IEEE 802.3af and IEEE 802.3at (PoE Plus) compliant PoE Tests for classes and loads cable up to 25.5 watts (at class 4 Identifies Mode A or B (pairs with PoE) |
| Active Ethernet | Indicates advertised speeds of 10/100/1000 base-T half or full duplex Can Link to network at 10/100 base-T |
| Network Discovery Test | Discovers and displays attached network devices Ping IPv4/URL/IPv6 DHCP/DNS Test LLDP/CDP identification TCP/UDP Connectivity test Port LED blink link in 0,1 Hz-steps |
| Reporting | PDF/CSV reports with PC- Software |
| Maximum Voltage | Parameters refer to the maximum voltage that can be applied to any 2 connector pins without causing damage to the tester RJ Jack: 66 Vdc or 55 Vac F-connector: 50 Vdc or Vac |
| Save Test Results | Stores up to 250 Cable or network tests with user defined names |
| Tone Generation | Tone Frequencies: 730 Hz and 1440 Hz |
| Languages | English, French, German, Spanish |
| Battery Life | For 6xAA, 9VDC, 2,200 mA-hr (typical) alkaline battery: Operating - 20 hours typical Standby - 1.5 years typical (200 uA max standby current), Batteries are included |
| Altitude | 10.000 ft (3048 m) operating |
| Temperature | Operating: 32 to 122°F (0 to 50°C) Storage: -22 to 140°F (-30 to 60 °C) |
| Humidity | 10 to 90% non-condensing |
| Enclosure | High-strength PC/ABS plastic with VO rating with boot Withstands 4 foot drop on to concrete |
| Display | Full color graphical LCD with 7,1 cm diagonal |
| Size | 1.85"H x 3.6"W x 6.8"L (4.7 x 9.15 x 17.3 cm) |
| Weight | With batteries: 1 lb 2 oz (510 g) |
Included
CableMaster 800 kit includes
- 1 x CableMaster 800 basic Unit,
- 1x Remote Unit,
- 6 x AA Batteries,
- Micro USB-Cable,
- Pouch